
TEN swivel joint permits 360 degree rotation allowing smooth flow radii for minimum flow restriction, and enables the piping to be configured in any directions as required.
Especially for cryogenic use such as LNG, LN2 or refrigerated ethylene, TEN swivel joint features safe and reliable performance. Also, TEN swivel joint is widely used for various applications including food industry, sanitary use as well as architecture.
Low Pressure : Green (G)
Max. Press. Test Max. Press. NSCW MPa |
Nominal Dia (NPS) |
Material | Max. Temp. (℃) |
End Connections |
4.1 2.1 |
10A (3/8B) to 100A (4B) | FCD500 | -0 to +125 | Rc |
Low Pressure : Blue (B)
Max. Press. Test Max. Press. NSCW MPa |
Nominal Dia (NPS) |
Material | Max. Temp. (℃) |
End Connections |
6.9 3.4 |
10A (3/8B) to 80A (3B) | S30C / S40C | -10 to +200 | Rc BE/BO FL |
100A (4B) | AISI1040 | ↓ ↓ ↓ | ||
150A (6B) to 300A (12B) | S40C | ↓ ↓ |
Low Pressure : Stainless (SST)
Max. Press. Test Max. Press. NSCW MPa |
Nominal Dia (NPS) |
Material | Max. Temp. (℃) |
End Connections |
4.1 2.1 |
10A (3/8B) to 50A (2B) | SUS316 | -50 to +200 | Rc BE/BO FL |
65A (2-1/2B) to 200A (8B) | ↓ ↓ |
Low Pressure : Double-Seal Type (BD) / New Double-Seal Type (BDR)
Double-Seal Type (BD)
TEN double-seal type swivel joint is mainly used for drain piping system for floating roof tank, which has special double-seal construction in order to withstand external pressure, and has stainless steel overlaid sealing surface.
New Double-Seal Type (BDR)
New double-seal type swivel joint series has been developed to provide long term usage, which is use of improved material compound for double-seal for external seal, and the double main packing to assure complete leak tight. The stainless steel overlaying has been extended to improve anti-corrosion functions.
Max. Press. Test Max. Press. NSCW MPa |
Nominal Dia (NPS) |
Material | Max. Temp. (℃) |
End Connections |
6.8 3.4 |
65A (2-1/2B) to 300A (12B) | S40C | -10 to +125 | FL |
High Pressure : Silver (S) / (SN)
Silver (S)
Max. Press. Test Max. Press. NSCW MPa |
Nominal Dia (NPS) |
Material | Max. Temp. (℃) |
End Connections |
||
41.2 20.6 |
10A (3/8B) to 50A (2B) | S40C | -10 to +200 | Rc | BE/BO | FL |
20.6 10.3 |
32A (1-1/4B) to 65A (2-1/2B) |
Silver (SN)
Max. Press. Test Max. Press. NSCW MPa |
Nominal Dia (NPS) |
Material | Max. Temp. (℃) |
End Connections |
||
20.6 10.3 |
80A (3B) 100A (4B) |
S40C | -10 to +200 | BE | FL |
Super High Pressure : Orange (SH)
Max. Press. Test Max. Press. NSCW MPa |
Nominal Dia (NPS) |
Material | Max. Temp. (℃) |
End Connections |
||
68.6 34.3 |
10A (3/8B) to 50A (2B) | S40C | -10 to +125 | Rc | BE | FL |
41.2 20.6 |
65A (2-1/2B) to 125A (5B) | ↓ | ↓ |
Super High Pressure Balance
NSB
Max. Press. Test Max. Press. NSCW MPa |
Nominal Dia (NPS) |
Material | Max. Temp. (℃) |
End Connections |
||
58.8 39.2 |
25A (1B) to 100A (4B) | S40C | -10 to +125 | BE | FL |
Sanitary (NS)
Max. Press. Test Max. Press. NSCW MPa |
Nominal Dia (NPS) |
Material | Max. Temp. (℃) |
End Connections |
Packing |
1.5 1.0 |
1S to 4S | SUS316 | -10 to +150 | ISO (IDF) | PTFE + Silicone Rubber |